|
|
|
How
to install a harness bar
A harness guide bar
provide a guide to your 5 point harness to rest on. The position
of the harness guide bar allows the shoulder belts to glide over the shoulders
and provide a resting place for them. It is by no means a safe mount
or anchor to be used to secure the 5 point harness, unless they are specifically
designed to do so. The harness bar bolts right where the factory seat belt
upper anchor bolts are located at. Just remove the factory upper
anchor bolt and position the harness bar at the hole and reinstall the
factory bolt. Some people reinstall the factory seat belts back along
with the harness bar, some don't. It all depends on how you are going
to be using your harness belts.
Back
to DIY menu
p-car.com
webmaster
|